This article will focus on no hot water and who to call.

After reading through, you’ll know the right person to call if there’s no hot water in the house. In addition to that, we’ll also show you how to troubleshoot electric or gas water heater issues.

Who do you call when there is no hot water? To save time, let’s get started.

Who To Call When Hot Water Is Not Working

Is your home lacking hot water? Such a situation can be highly frustrating. You can imagine going to take a hot shower only to meet an icy wave of unpleasant cold water.

This will make your skin crawl and upset your morning routine. Indeed, that’s not the situation you’ll want to happen or continue in it.

So who to call if there’s no hot water in your house? Well, it depends on the type of issue at hand. The water heating system involved both plumbing and electrical work.

You’ll want to avoid inviting a plumber to come to do the job of an electrician and vise vasa. Usually, calling out the wrong person for the job can cost you time and money.

Don’t Call a Technician Yet for Heater Issues

When there’s no hot water in your home, be cautious in placing a call. Several factors can cause your heating unit to stop heating water as expected.

You’ll need to troubleshoot the unit to know why it’s malfunctioning. That way, you can prevent unnecessary or continued damage.

In this case, you must check the circuit breaker, thermostat, and pilot light.

Other possible issues are timer settings, power supply, damaged fuse, faulty cord, auto safety shut off, and bleeding radiators.

Other things to check include heating elements, burner, gas leakage, wiring, and high-temperature cut-off switch. Let’s look at a few of these factors.

  • Circuit Breaker

When a circuit breaker trips, it will stop the electricity that flows to your tank to heat the element. You must reset the fuse and wait a few minutes for the water to reheat. If it still doesn’t work, consider calling an expert to fix the issue.

  • Thermostat

A faulty thermostat can also deny you hot water. It is designed to trigger the boiler to heat the water in the tank when needed. You’ll have no hot water if anything goes wrong with your thermostat.

Therefore, you’ll need to check its settings if there’s a change due to an accidental knock. You must replace the thermostat if faulty or completely broken.

  • Timer Settings

Sometimes, when the timer settings are altered, it can throw a spanner in the works. The heating system will fire at the time you don’t need it.

Before you call an expert, you can do a few fixes. Set your heater to come on for 20-30 minutes to ensure it’s registering properly.

If you check and there’s nothing wrong, it will be time to call an expert.

Best Time to Call a Plumber

You may call a plumber if you diagnose any of these issues: water leakage, discoloration, pressure valve issues, no water flowing taps, rusty water coming out from heaters, whistling noises, pilot light won’t stay lit, and no hot water.

Allow us to discuss a few of these problems briefly.

  • Leaking Gas or Water Tank

A leaking gas or water tank can cause no hot water in the house forever.

When there’s a gas leakage, the burner will experience an insufficient flow of gas to fire the heater. In other cases, the leaking gas may cause a risk of explosion and potentially cause property damage.

Similarly, water leaks could cause low pressure or no water at all.

Anytime you notice a gas or water leakage, quickly seek the help of a plumber. Such an expert will come to fix the issue professionally and timely.

  • Eroded Water Pipe Or Tank

Naturally, the water network contains some minerals such as calcium and magnesium. Over time, these minerals can build up and cause corrosion or erode your water tank.

Eventually, this situation can culminate in low water pressure. So if you notice your water tank or pipe is rusted, immediately call a plumber.

  • Problem with Heating Element

Water heaters, whether gas or electric, are built with heating elements, one at the top and the other at the bottom. These elements are typically responsible for boiling the water in the tank.

Whenever they experience a hard blow or are aged, they might not heat the water as expected.

  • Leaking Relief Valve

A relief valve is a safety mechanism installed in water heaters. It allows a small amount of hot water to drip away safely. This relieves pressure on the hot water system.

However, it’s in rare cases relief valve develops issues. But you’ll experience no hot water in the tank if it does. In that case, you’ll need to call a professional plumber to fix the issue.

Best Time to Call an Electrician

If you experience the following issues, you should call an electrician. The circuit breaker keeps tripping, blown or overheated fuse box, and loose wiring.

Let’s talk about a few of these problems.

  • Blown or Overheated Fuse

When there’s a blown or overheated fuse, it can result in no hot water. That’s because there will be no electricity to power the heater and boil the water.

In that case, you must call an electrician to check the fuse box. If it’s faulty, proper repairs should be made. But in the case of severe damage, you’ll need to swap with a new one.

  • Wiring Issues

Loose wiring is one of the most minor problems with water heaters.

However, it’s worth looking at if you have no hot water. Remove all power units and check the wires and connections. If there’s a disconnection, it’s best to call an electrician to fix it.

There’re lots of issues that may cause no hot water. While you might fix some minor issues, others will require the touch of a professional plumber or electrician.

But when inviting either of these professionals, ensure you opt for fully licensed ones. Several of them are available. You can check them in your locality or google the ones near you.

Until then, you can diagnose the above problems when you discover you’re no longer getting hot water as expected. This will help you make informed decisions regarding your water heating system.

Leave a Reply

Your email address will not be published. Required fields are marked *