Palm Tree Stump Removal Methods And Options

If you’ve never had to deal with a palm tree stump before, then keep reading, as I will be discussing palm tree stump removal.

Palm trees are tall, beautiful trees that have a slightly curved trunk and well spread upper branches. But just like any other tree, a time may come when you have to trim or cut them down.

After it is cut, you still need to get rid of the stump.

Is Palm Tree Stump Removal Different From Other Stump Removals?

The answer to this question is “not really”. Removing a dead palm tree stump can be done using the same methods as other tree stump removal.

How To Remove Palm Tree Stump And Roots

Most palm trees have extensive roots that are concealed below the ground. They also feature several thin roots that extend into the so This means the palm tree stump removal will follow the same process as others.

Also keep in mind that palm tree trunks are not as hard as other tree trunks, such as pine trees. This means your chainsaw will have an easy time cutting the stump down its lowest height.

READ: Cost Of Buying A Palm Tree

Below, I will be giving you options on how to remove a large or small palm tree stump.

Use Stump Grinders

If you have many palm tree stumps to remove, then, stump grinding is one of the best options.

A stump grinder will cut the palm tree stump into tiny chips, which you can use as mulch. It also gets the job done fast and effectively.

If you own a stump grinder, then you can do this job yourself. You can also rent a grinder, or just hire professionals to get the job done for you.

Keep in mind though, a stump grinder will not get rid of the roots, you have to dig it up yourself.

You may choose to dig up the roots before or after you grind the palm tree stump.


  • Stump grinders get the job done fast
  • It is ideal for clearing out more than one stump in a yard
  • It doesn’t require the use of kerosene, diesel, or chemicals
  • The chippings from the stump are perfect for mulch


  • It is expensive
  • It requires the use of a heavy machine, which must be moved to and fro
  • It does not remove the roots.

Heavy Machinery

If the palm tree you are planning to remove is very large, then a stump grinder may not be your best choice, especially if there are more than one.

Large palm tree stumps can be effectively pulled off with a backhoe. It is quite expensive but very effective and fast

The good thing with heavy machinery such as this is that you can pull off the stump and the roots at the same time.

I don’t assume that you know how to operate this machine. Even if you did, what are the chances you’ll have one since it’s a heavy-duty tool?

You will need to hire the services of a professional tree removal company if you want to employ this method of palm tree stump removal.

The pros are well trained in the use of this machine, and they understand every safety measure that needs to be taken, so let them do the job.

After the palm tree stump has been uprooted, you can use a chainsaw and cut it up into smaller bits. Use the pieces for firewood, or dispose of them if they are of no use to you.


  • With this method, both the palm tree stump and the root will be removed from the soil
  • It is ideal for removing several tree stumps
  • You don’t need to expend your energy doing the work
  • This removal method does not damage the soil


  • It is very expensive
  • You cannot do it yourself
  • After the tree and roots are removed, a large hole will be left on the site, which you will have to refill later

Get Rid By Hand

If you are hoping to remove your palm tree stump without spending a large sum of money, then your best bet is to dig up the tree stump yourself.

Yes, this will consume a lot of time and it will probably wear you out, but you will have some money saved after the palm tree stump has been removed.

Here’s what to do –

Dig into the soil, about 3 feet away from the base of the palm tree. By doing this, the stump and its roots system will become loose.

If you want to retain most of the root in a single root ball, then apply some water around the base of the root. This will make the ground softer and allow the roots to remain attached to the palm tree as it is pulled off.

After moistening the base area of the stump, it will be ready for removal.

Proceed to insert a piece of burlap under the roots, as this will help pull out the palm tree stump from the ground.

Don’t expect to do it alone, no matter how moist the ground is, the palm tree stump will still maintain a significant amount of attachment to the ground. For this reason, you will need the help of some extra strong hands.

After the stump has been pulled out, you will have a hole to deal with. Cover it up after you must have caught your breath.


  • This is a cost-effective method of palm tree stump removal
  • It is safe, as it requires no fire or chemicals
  • There will be no heavy machines to deal with using this method


  • This method is exhausting and time-consuming
  • You will need the help of a few friends to help pull the stump out of the ground
  • It leaves a hole in the ground

Use Chemicals To Rot Stump

When you think of all the hard work that comes with pulling the palm tree stump manually or the use of loud heavy machines, then you may want to consider using chemicals.

These chemicals help your tree stump decompose faster, by basically “eating them up”.

You can purchase such chemicals at stores and apply them to your palm tree stump.

Just drill some holes at the top and the sides of the stump and pour the chemicals in. Cover the stump with a tarp to make sure the chemicals are not washed away by rain.

I have to mention though, this method of palm tree stump removal may be cost-effective, but it is not time-effective. You have to be patient, as it will take 4 to 6 weeks for the stump to start decomposing. It could take up to a year if the palm tree is very large.


  • It is a cost-effective method of palm tree stump removal
  • You can do it all by yourself
  • No need for loud and heavy machines
  • The roots will be rotted too


  • It takes a long time before you see results
  • You need to be careful of the chemical you are using, many can damage the soil

Light Up The Stump

Here’s another viable option for palm tree stump removal. Yes, burn it out.

Out of all the methods you can employ, I would say this is the one that poses the biggest threat to human life, but only if precautionary measures are not followed.

The first thing you need to do is to trim the stump to its lowest possible height. The less wood there is to burn, the less fire there would be.

When this is done, drill some holes at the top of the tree and the sides and fill it up with kerosene or diesel. Gather up some firewood around the base of the stump and add some kerosene on them as well.

Leave it to soak for a while, then moisten the surrounding areas to make sure the fire does not get out of hand.

Many people who have experience burning tree stumps will advise that you build a stone wall around the stump before you light it, just to guarantee that the fire doesn’t spread beyond its limits.

When you are sure the kerosene or diesel has been well soaked-in, you can light up the tree stump and leave it to burn.

Be sure to take all precautionary measures before you begin. We all know how destructive fire can be. Worse still, how hard it can be to control.

Have a fire extinguisher at hand when you light up your palm tree stump. Also, be sure to check with your state’s regulations on lighting fires before you begin.

It would also be wise to inform the fire department and the neighbors of your plans first.


  • It is a cost-effective method
  • You can do it alone
  • It is pretty fast
  • You won’t expend too much energy on the job


  • There can be fire accidents
  • This method produces smoke


As you can see, removing a palm tree stump is pretty similar to removing most tree stumps.

I trust this article on palm tree stump removal had been helpful.

Stay safe!

Leave a Comment