How much does it cost to have an in-ground pool removed? This is the focus of our discussion.
Do you have an in-ground pool you wish to have removed? If you do, one of the primary considerations would be the cost of the project.
Basically, there are two types of pools; above-ground and in-ground pools.
As you read on, you’ll find information on varying cost factors as well as the cost involved. In-ground pool removal cost ranges from a low to high as well as an average cost.
How much cost you incur for pool removal will be determined by pool type, size, and location among others.
In-Ground Pool Demolition Cost
The cost of demoing an in-ground pool varies widely. On average, you’re likely to incur a fee of around $5,000.
However, expenses can climb to as much as $9,000 to $19,000 where complete pool removal is required.
To fully understand what these costs are about, we’ll need to consider a number of scenarios. These include whether a new pool will have to be installed in place of the old.
Also, a gaping hole is left behind after the demolition of an in-ground pool. The material used to fill such hole will determine total removal cost.
i. Extent of Demolition Impacts on Cost
The extent of demolition refers to the type of demolition performed. An in-ground pool may be demolished wall by wall or filled in. the former is the most expensive of the two.
Wall-by-wall pool removal can incur as much as $9,000 to $19,000.
For wall-by-wall demolition, all components of the pool such as its walls, floor, rebar and other materials are removed. It depends on the type of material such pool is made of.
Most in-ground pools are made of concrete and gunite.
A pool fill-in is the least expensive with an average cost of $5,000. While this may seem less expensive, it isn’t as thorough as a wall-by-wall demolition.
This type of demolition completely removes the pool from the ground.
Here is what it would cost to remove an above-ground type.
ii. Cost of Filling an In-Ground Pool
In-ground pool removal isn’t complete without filling back the hole. Here, dirt is used or concrete. When filling with dirt, the average cost for such will be around $12 per cubic yard.
For pools having a maximum depth of 6 feet and about 20 feet long by 15 feet wide, costing will be quite different.
For such pools, expect to pay around $60 to $100 per cubic yard. Using dirt to fill an in ground pool might be cheaper, but has its downsides; there are chances it will settle with time.
This creates a situation of instability of the ground above it.
The remedy for such is to have dirt mixed with stone. An in-ground pool may also be filled with concrete. If this sounds great to you, you’re likely to attract a fee of around $100 per cubic foot.
Medium sized pools (measuring 15 feet by 30 feet) will cost about $500 to $800 for the fill.
-
In-Ground Pool Removal and Replacement Cost
Not every homeowner wants to have an old pool removed and the space filled up. A new pool may be planned in place of the old. For this to be done successfully, the old and worn-out pool needs to be removed first.
The good thing with this method is that you won’t be paying for filling up the space.
Because the space will be reused, you’d save as much as $100 per cubic foot in cost. Nevertheless, in-ground pool removal and replacement is still costlier.
Installation costs for a new in-ground pool alone is about $9,800 to $33,000.
Factors Influencing Cost To Remove An In-ground Pool
To have an in-ground pool removed, you’ll need to figure out a number of factors. Things such as pool size, location & accessibility and whether such pool needs to be emptied must be considered.
Additional factors include type of materials being removed, and the method of demolition.
-
Pool Size
Pool size is a primary consideration when it comes to costing. As seen so far, there are varying sizes of in-ground pools with the largest attracting higher removal costs. Demolition costs drop as size decreases. The demolition contractor you hire will measure the size to offer an exact estimate.
-
Location & Accessibility
Pool location and accessibility are key aspects of removal costing. The more difficult it is for demolition equipment to be taken to the pool site, the higher the cost will be.
In terms of location, pool removal of the same size and dimension will vary across different cities.
For example, the average cost of full demolition differs in the following states; Washington at $3,800 and Virginia at about $5,400. Full in-ground pool demolition will cost around $5,500 in Texas and about $3,300 in North Carolina.
-
Does the Pool Require Emptying?
Before an in-ground pool is demolished, it needs to be emptied of any water. If you’ve done this, there will be no added expense when demolition contractors come over.
When left with water, the demolition contractor does the emptying. However, this isn’t done free but factored into demolition cost.
-
Type of Materials Being Removed
Although in-ground pools differ in design, they consist of varying components that may be similar.
The extent of demolition (whether full or partial) will determine if all such materials are removed. These range from landscaping, deck, stairs, among other pool materials.
-
Method of Demolition
When it comes to methods of demolition, there are two major types to consider; partial or full demolition. As the names imply, partial demolition isn’t complete and involves removing only sections of the pool.
Full demolition is more thorough and covers all aspects.
-
Who You Hire
How much you pay for in-ground pool demolition is largely determined by who you hire for the job. Demolition contractors and services offer competitive rates.
The best way to take advantage of this is by asking for multiple quotes from these demolition services.
Doing so enables you take advantage of variations in pricing. However, you’ll need to only go for reputable demolition services.
Figuring out in-ground pool removal cost shouldn’t be difficult at all as long as you know what to look out for.
With this article, you have a guide that gives you a fair idea of what’s involved.