Here, we discuss the basic ways to use the pole saw while standing on a ladder. If you plan on using both soon, you’ll find this article highly informative.

How to Use a Pole Saw on a Ladder

To get the best of any tool, there needs to be an understanding of how it works and how to use it. Apart from getting desired results, safety is also paramount.

Certain tools tend to pose greater risks than others. In this article, we’ll be discussing one of such risky but handy tools.

The pole saw is under focus here. Combining this with the ladder presents a much greater risk as not everyone is well suited for working using these.

It’s quite challenging.

Before we get into details on the use of pole saws on ladders, it’s important to state that the first-time user faces a daunting task.

Even seasoned arborists and loggers still acknowledge the challenge of combining a pole saw and a ladder. Of course, the ladder helps you reach higher.

For a better understanding of the challenges posed, you need to appreciate the fact that pole saws are designed to reach higher sections during tree trimming jobs.

You only need a ladder when the limbs you intend to cut are still out of reach. Here, the risks increase with every step taken up the ladder.

This, coupled with the fact that the pole saw is quite heavy, makes things a bit precarious for the first-timer.

Maintaining body balance while standing on the ladder and using the saw is a skill you must master. Overall, it’s not a job for the faint at heart.

With this reality clearly stated, let’s discuss ways to use both tools.

Using a Pole Saw on a Ladder

In mentioning the processes involved in using pole saws on ladders, we start by stating the need for professional help. As discussed above, this task is risky and should be treated.

If you must adopt the DIY process, ensure your pole saw is properly assembled.

Check the quality of your ladder and map out the area(s) where the branches will fall. You need help holding the ladder. Extend and lock the pole saw in place in readiness for the job.

Now, place your saw on the targeted branch and cut. Your safety and that of your assistant are paramount. With trimming completed, clear the area.

i. Seek Professional Help

One of the key decisions to make is deciding how to proceed with the job.

Risky jobs such as these require calling for professional help. Arborists are well trained for these jobs and adopt all safety protocols to limit injuries or accidents.

If you have doubts about your ability to complete this job, your best bet will be to call for expert help. This alternative is much easier, safer, and faster for everyone involved.

ii. Properly Assemble your Pole Saw

As a DIY’er, your pole saw needs to be properly assembled. Double-check to make sure everything is in order. Cordless pole saws tend to be easier and safer to use than those with cords.

If you can, only go for a cordless pole saw. With your pole saw ready, you’ll need to make other arrangements.

iii. Check the Quality of your Ladder

The ladder is the platform you’ll be standing on while trimming the branches. As such, you need to ensure it’s sturdy and of good quality. What type of ladder do you have?

Have it properly set against the tree or standing at the right angle. It should be placed so that you don’t have to stretch away from its center of gravity.

iv. Map Out Areas where Branches will Fall

Mapping out areas where trimmed branches will fall is of vital importance. You should avoid situations where you stand directly below such branches.

Your ladder should only be positioned after figuring out where branches are likely to fall. With this step completed, you’ll need some help getting on the ladder.

 v. You Need a Helping Hand

Using a pole saw on a ladder shouldn’t be done alone. You need a helping hand to hold the ladder steady. This way, the chances of falling off are minimized.

Finding more than one person to help out will enhance everyone’s safety.

vi. Extend & Lock Pole Saw in Place

At this point, you’ll need to climb up the ladder to commence trimming. Extend your pole saw and ensure it’s locked at the right length before starting the job.

You can climb up the ladder before the saw is handed to you. Carefully position yourself at the right place to commence work.

vii. Start the Saw and Cut Targeted Branches

This is where cutting begins. The level of work required depends on the thickness of the branch. Thicker branches will take longer periods to complete the job.

When cutting multiple branches, one position may not be sufficient to reach all areas. You may have to reposition your ladder multiple times before completing the job.

viii. Safety Matters

Your safety and those of others helping out are paramount. As such, you may want to put on basic safety gear such as hard hats, safety goggles, and gloves.

The same applies to everyone involved. You’ll also need to cordon off the work area to prevent kids from getting too close.

You’ll have to avoid climbing too high up the ladder. Stand at a level you can easily jump off when things go wrong. Getting too high is very risky.

It will serve you best to call a pro for difficult trimming jobs.

ix. Clear the Area

Having trimmed all targeted branches, the riskiest part of the job is over.

What remains is to have the area cleared of any branches. This may require further cutting tree limbs into smaller pieces for easy removal. Of course, you’ll need all the help you can get with clearing the area.

This is how to use a pole saw on a ladder.

It’s a risky job that can be properly executed when adopting the right techniques. You’ll do well to call for professional help if you can.

Leave a Reply

Your email address will not be published. Required fields are marked *