This article looks at grout cleaning on tile floors using hydrogen peroxide.
Grout cleaning on tiles can be an enjoyable or tolerable and laborious process depending on the technique and supplies used.
Cleaning mostly becomes problematic when results aren’t visible after laboring on the job.
It’s a DIY cleaning procedure that gives you desired results when done or adequately implemented. For this to be possible, you’ll need to follow the cleaning tips.
We’ve discussed the different ways hydrogen peroxide can help get rid of ground from your tiles.
Clean Grout Hydrogen Peroxide
More often than not, people try all sorts of cleaning techniques and approach with little result.
That is because the grout on tiles can be stubborn to deal with. To understand why you must look at what it’s made of; grout consists of established mildew or sand particles.
Soap film also worsens ground conditions as it easily clings to the scum on grout.
If your tiles haven’t been frequently cleaned or maintained, chances are that a more thorough cleanup is needed to dislodge grout from tiles.
Thankfully, products like hydrogen peroxide help eliminate grout.
How Hydrogen Peroxide Works on Grout
Whether used alone or in combination with other products, hydrogen peroxide is known to have specific properties that help with cleanup.
This mild antiseptic has many uses, including preventing infection, using a mouth rinse, and relieving mild mouth irritations.
Out of its several uses, we are more interested in its ability to clean tile grouts. When applied to dirt, it helps cut through grout residue, thus helping clean and brighten discolorations.
This product can be used directly or in a mixture with other products like baking soda for better cleaning results.
Using Hydrogen Peroxide to Clean Grout on Tiles
When it comes to using hydrogen peroxide as a cleaning agent, you can adopt multiple strategies.
These range from using it as a stand-alone cleaning supply or combining it with other ingredients to form a potent grout-cleaning mixture.
Here, you’ll learn all about the different options there are.
i. Hydrogen Peroxide and Lemon Grout Cleaner
Here, the aim is to make an effective grout cleaner for tiles. It has been used by many with excellent results. Asides from the apparent ingredients mentioned (lemon and hydrogen peroxide), you’ll also need some tartar cream.
A thick paste consisting of tartar and lemon juice is made.
With hydrogen peroxide poured into a spray bottle, spray the grout to dislodge mildew and mold. You may have to repeat the process before scrubbing and rinsing.
Now your homemade grout cleaner will need to be applied along the grout.
This is followed by further scrubbing before allowing it to sit for a few minutes to about an hour before wiping dry. You may need to repeat the process until undeniable results are obtained.
ii. Using Hydrogen Peroxide Solution to Clean Grout on Tile Floors
Another effective cleaning option that can be relied upon involves using a hydrogen peroxide solution.
Note that the emphasis here is on “solution.” So, what’s the other ingredient to be combined with hydrogen peroxide? It’s good old water!
You must use a definite amount of water and hydrogen peroxide to achieve desired results. Equal parts of hydrogen peroxide and water are combined and mixed.
This simple process makes your cleaning solution ready for use.
Empty the contents into a spray bottle and drench your grout with it. For this solution to be fully active, sufficient time is needed to pass before wiping with a microfiber cloth.
Wait for about an hour before rinsing and wiping. Your grout should be clean at this point.
If the results do not match the anticipated results, you might have to repeat the process and wait a bit longer (for about 2 hours). This should be able to get the job done.
iii. Hydrogen Peroxide with Bicarbonate of Soda
To make your solution, you’ll need to add ½ cup of bicarbonate of soda to ¼ cup of hydrogen peroxide and a teaspoon of dishwashing liquid.
Now quickly clean the area or surface and apply the thick paste along the grout lines. It would be best to scrub this as you go and be allowed to sit between 10 to 15 minutes.
After this period, have the treated area(s) rinsed with clean water. This should be followed by drying the area. There should be visible results.
It would be best to be careful with newly installed tile floors as specific cleaning approaches could cause damage. You might want to consult the manufacturer’s maintenance guidelines.
iv. Using Concentrated Hydrogen Peroxide
Here, there’s no need to make any mixtures.
It would be best if you simply poured hydrogen peroxide into a spray bottle without dilution. This is pretty much straightforward. Spray along your grout lines and wait for between 10 and 30 minutes.
That should be enough time for it to loosen the dirt.
Next, have the area rinsed and dried. If the results you see don’t impress you, you might want to repeat the process or try other alternatives.
Will Hydrogen Peroxide Use for Grout Cleaning on Tile Floors Give Good Results?
While there have been many claims about the efficacy of the cleaning techniques discussed above, not everyone has the same outlook or enthusiasm about hydrogen peroxide.
Some have complained about the unreliability of some approaches.
However, this failure may be due to how the cleaning process was performed, the mixture used, and various other factors. In a nutshell, what works for one person may not work for another.
If you belong to the category of people who have tried with little results, you might want to look for other options.
Some persons might not have the luxury of time to perform this procedure. For such, it’s best to have professional cleaning services look at your tiles.
These professionals have all the solutions you need.
If you’ve read this, you should understand better than when you first started. Hydrogen peroxide can serve your needs in many ways.
You only need to pick what works best for you.