In hot weather, air conditioners are a great home comfort option. However, a malfunction could develop when utilizing these appliances and must be fixed before it worsens.
Trane ACs are well-known for their reliability and durability. But they’re also susceptible to malfunctions or damage in severe cases.
Some faults might be easy to fix, such as a swift reset. However, qualified and licensed HVAC technicians might need to heal others.
Where is the reset button on a Trane ac unit? Let’s find out.
Trane XR AC Unit Reset Button
Is your Trane AC not running correctly? It may be a fault that requires a reset, as highlighted above. But do you know where the restart button is?
Do you also desire to learn how to rest in such a unit? If so, you’re fortunate. This post will explain how to restart this device and show you where to find the reset button.
Reasons to Reset a Trane Air Conditioner
There’s more than one reason to reset such a system.
The most common is a lack of power, a faulty thermostat, a tripped circuit breaker, or a problematic compressor.
Other than these, your device can malfunction if there’s a problem with the ductwork or the air filters are dirty.
To determine the exact problem with your AC, you should seek the help of a qualified technician. They’re trained to detect and fix issues with HVAC appliances.
-
About the Trane AC Reset Button
The Trane AC restart button is a high-pressure reset to safeguard the unit from further harm. When there’s a power outage, it’ll automatically turn off to prevent current overflow into the device.
The reset button, typically red or yellow, is located in the outdoor unit near the power switch and is clearly labeled as a reset button.
Tips for Resetting a Trane AC
Rebooting this model of air conditioner is simple, even for beginners. Once you spot the restart button, press and hold for three to five seconds.
The unit will then restart and begin to cool your home as expected. But if, after resetting your AC, it still doesn’t work optimally, it’s time to seek expert help.
What If My Trane AC Lacks a Reset Button?
Unfortunately, some Trane ACs and heat pumps are designed without a conventional restart button. Therefore, you cannot reset such units by pressing the dedicated button.
Such ACs often come with safety features and circuit protection. So, how do I reboot such kinds of devices? It’s also easy.
Two workable options to restart such units lack a dedicated reset button. One way is to reset the thermostat. Another way is to continue the circuit breaker.
Let’s review these methods so you understand them better.
Resetting Trane AC Through the Circuit Breaker
Turn off the power supply for compressor-attached models using the shutdown panel. Use the unit breaker to access the circuit breaker box’s power supply after turning off the power source.
You can be sure your Trane AC is entirely off by cutting the power to the relevant system component. The system must cool down for 15 to 30 minutes.
Turn on the AC breaker when appropriate, but ensure the thermostat is on “cool.”
Resetting through a Thermostat
This is another excellent way to restart a Trane AC. For those with modern units, such as the XL824, 850, and 1050, you must ensure your AC is in idle mode.
On the screen, tap the menu and select settings. Some options will pop up; click on reboot and press yes to confirm your command.
The component will begin to reboot. The entire procedure typically takes a few minutes. Set it to “cool” mode after the reboot is complete.
You’ll discover that your unit will start operating as usual.
If you have an older model, Trane AC, follow the steps below to restart it. Initially, confirm that your air conditioner is in an idle state.
The thermostat switch is then inside the breaker box. Hold the button in the off position for 20 to 30 seconds after turning it there.
Return and turn on the component when the allotted time passes; the reset process will start. It would be best to wait because completing it will take some time.
The AC will run most efficiently if you let the thermostat control it.
Troubleshooting a Trane Air Conditioner
Diagnosis is an excellent technique to find and solve problems if your device isn’t malfunctioning. Check the power and ensure the device receives electricity before attempting to repair your system.
Additionally, make sure the circuit breaker is turned on by checking it.
Next, you must ensure the component is set correctly, and the batteries are working perfectly. Consider checking the air filters.
Sometimes, dirt and debris might plug them, reducing ventilation. When it occurs, the device will start to break down. Moreover, if the filters are damaged, consider changing them for new ones.
Finally, check the ductwork for blockage or possible leakage. When ductwork is blocked, the unit may not distribute air properly.
If you can’t run these checks yourself, you can have a professional inspect and repair where necessary.
-
Missing Breaker Panel Cover
Your circuit breaker box may no longer have a cover.
The issue carries a significant risk of fatal electrocution. Therefore, you should avoid touching or approaching the breaker box.
Make an urgent call to a technician to replace the cover.
-
What about Exposed Wires at the Breaker Box
Similarly, if you see exposed wires at the breaker box, you shouldn’t approach.
There is a risk of electrocution from exposed cables’ electric charges. Call a certified and licensed HVAC specialist to come and handle the issue as usual.
-
My Breaker is Tripping Frequently
Is your breaker regularly turning on and off? Take off performing unit maintenance.
A broken connection or exposed wires could cause such a malfunction. Resetting the device is not advised in this situation. That’s because it might start a fire.
Most minor issues with a Trane AC can be fixed by resetting it. The reset procedure is less complicated than expected, but if the problem persists, seek professional help.
Qualified experts can locate and resolve issues with your AC.